# Generated by Linode Network Helper
# Sun Oct  5 16:55:55 2025 UTC
#
# This file is automatically generated on each boot with your Linode's
# current network configuration. If you need to modify this file, please
# first disable the 'Auto-configure networking' setting within your Linode's
# configuration profile:
#  - https://cloud.linode.com/linodes/19740464/configurations
#
# For more information on Network Helper:
#  - https://www.linode.com/docs/guides/network-helper/
#
# A backup of the previous config is at /etc/sysconfig/network-scripts/.ifcfg-eth0.linode-last
# A backup of the original config is at /etc/sysconfig/network-scripts/.ifcfg-eth0.linode-orig
#
# /etc/sysconfig/network-scripts/ifcfg-eth0

# For full descriptions of what these switches do,
# and what the interface's defaults are, see
# /usr/share/doc/initscripts-*/sysconfig.txt


DEVICE="eth0"
NAME="eth0"
ONBOOT="yes"

# "bootp" and "dhcp" are for dhcp, anything else
# is for a static configuration. "none" is given
# by sysconfig.txt so we're using it.
BOOTPROTO="none"



# Use hardware-based IPv6 addresses, no privacy extensions.
IPV6INIT="yes"
IPV6_ADDR_GEN_MODE="eui64"
IPV6_PRIVACY="no"


# Since we want a static configuration, we're specifying DNS
# addresses in this file for NetworkManager. "No" here tells
# NM to use them when BOOTPROTO!=dhcp.
# If NM is disabled the value will be yes
PEERDNS="no"

DOMAIN=members.linode.com

GATEWAY0=66.228.60.1


# resolvconf doesn't recognize more than 3 nameservers.

DNS1=45.33.99.176
DNS2=45.33.102.175
DNS3=173.230.136.5



# Sysconfig.txt says that PREFIX takes precedence over
# NETMASK when both are present. Since both aren't needed,
# we'll go with PREFIX since it seems to be preferred.


# IP assignment for eth0
IPADDR0=66.228.60.225
PREFIX0=24